Turning

EMCO

See EMCO SUPER11 CD treipink on toodetud 2005. aastal Austrias. Selle otsa laius on 650 mm, pöörde läbimõõt üle voodi 280 mm ja pöörlemisläbimõõt üle 170 mm ristlibisemise, mis on ideaalne suhteliselt suurte toorikute jaoks. Oma kiirusvahemikus 55 kuni 2200 pööret minutis pakub see täpset juhtimist. Sellel on pikisuunaline etteanne vahemikus 0,03–0,3 mm/pööre. Masin on seisnud 4 aastat, seega roostekile vajab eemaldamist. Üldiselt on seal oma vanuse kohta suhteliselt vähe tunde. Saadaval on ka teine üksus EMCO SUPER11 CD, YOM 2003.

This EMCO SUPER11 CD Lathe was manufactured in the year 2005 in Austria. It offers a tip width of 650 mm, a swing diameter over bed of 280mm and a rotation diameter over cross slide of 170 mm which is ideal for relatively large workpieces. With its speed range from 55 to 2200 rpm it offers precise control. It features a longitudinal feed in the range of 0.03 - 0.3 mm/rev. The machine has been standing for 4 years, so the rust film needs to be removed. In general it has relatively low hours for its age. A second unit EMCO SUPER11 CD, YOM 2003, is available.

EMCO SUPER11 CD  Eestvaade

EMCO SUPER11 CD  Parema külje vaade

EMCO SUPER11 CD  Külgvaade

EMCO SUPER11 CD  Tööruum

EMCO SUPER11 CD  Juhtseade

EMCO SUPER11 CD  Nimeplaat

Machine Tools

Horizontal Turning Machine

EMCO SUPER11 CD

sold

See EMCO SUPER11 CD treipink on toodetud 2005. aastal Austrias.

EMCO SUPER11 CD treipink

Borja Garcia

HAAS

SPINNER

Mazak

Index

DOOSAN

EMCO - SUPER11 CDDE-TUR-EMC-2005-00001

Tehniline teave - EMCO SUPER11 CD

Seotud tooted EMCO SUPER11 CD